Level Crossing Removal – Public Access
APS successfully secured this project to provide a 13.5m, 5kPa temporary footbridge in support of the major programme presently underway in Melbourne to remove railway level crossings. Read more
Fast FlexBeam Bridge
To allow for blasting and painting operations on this rail bridge near Coffs Harbour NSW, the requirement was for an 8m wide access deck below the bridge for a total length of 150m. Read more
Glenroy Railway Station
As part of Melbourne’s level crossing removal programme, Stilcon Scaffolding successfully secured the Glenroy Railway Station contract to provide public access stairways, and a 2.57m wide overpass spanning 16.5m between the platforms. Read more
Up and Over at Claremont
To construct a railway underpass required the redirection of a Principal Shared Pathway (PSP) and a bridge to support signalling and communications cables whilst excavations were underway. Caledonia (WA) secured the contract and, using their Layher Allround Scaffolding system, a DDA-compliant cycling/pedestrian ramp was constructed. Read more
Wallacia Bridge – high load-bearing cantilevered scaffold
Australian Scaffolds and Access regularly build scaffolds to support high loads. However, this project presented some unique challenges: designing 3m cantilevered scaffolds over water to take 2.5 tonne loads to enable extensive bridge modification work to be undertaken. Read more
West Gate Bridge Melbourne
APS Industrial Services using the Layher Allround scaffolding system to provide very effective access for blasting and painting operations. Read more
Boyne River Rail Bridge
MI Scaffold was engaged by Canstruct to supply and install Layher Allround scaffolding to the Boyne River Rail Bridge. The requirement was to provide access to the piers to enable maintenance and repair works to be carried out. Read more
Mundaring Weir Wall
Paragon Scaffolding Services was recently engaged by Clough to construct a Layher Allround access scaffold to the Mundaring Weir wall. Clough stipulated that the civil works below must continue undisrupted during the scaffolding erection and dismantle. Read more
Scaffolding North Johnstone Bridge
Benchmark Scaffolding was engaged by Queensland Rail to supply and install Layher Allround scaffolding to the North Johnstone Bridge. The project was to provide access to the headstocks and underside of the bridge for maintenance and repair works. Read more
94m suspended stair
Above Scaffolding was appointed to design and install a 94m stairway access tower into an excavated shaft as part of a major infrastructure project in Sydney. The client specified the requirement for the stairway to be suspended and to be progressively extended in length to keep pace with the continuous excavation work. Read more
Mobile bridge access scaffold for blast and paint works
This solution is a fine example of what can be achieved with the broader range of Layher components. Due to tight dimensional constraints, and bridge loading, this ingenious solution was made possible by developing a mobile solution. Read more
Pathway with Allround Scaffold
Fulton Hogan needed heavy duty propping to build a shared use pathway over the Maroondah Highway, Ringwood, Victoria. John Onley, CGE Hire MD said, “we used six Layher Allround heavy duty propping towers to support a total of eight deck sections weighing from 27t to 38t each. Read more
